Actions

Creating a shield tree: Difference between revisions

From EastKingdomWiki

(New page: ==Materials needed== * ==Tools needed== * ==Directions== # ==More Information== *Creating a device shield for the Crown Tourney heraldry trees Category:Articles)
 
No edit summary
 
(2 intermediate revisions by the same user not shown)
Line 1: Line 1:
==Materials needed==
==Materials needed==
*
 
1 12' 2x4 <br>
2 8' 2x4's <br>
1 24" x 3 1/2" piece of 1/4" luan plywood or equivalent<br>
1/2 sheet 3/4" plywood<br>
4 3/4" x 48" hardwood dowels<br>
8 standard door hinges (there are probably better options out there, I used what I had on hand)<br>
2 5/8" x 6" shoulder bolts w/nuts and washers<br>
~10 4" screws<br>
1 3-4' strap. (we used nylon because, again, it was what we had.)<br>
<br>
Full height is 15' 6".<br>
<br>
Disclaimer: This is a prototype that I completely made up as I went along. If anyone has better ideas for assembly, materials, design.... whatever: PLEASE, feel free to run with it.


==Tools needed==
==Tools needed==
*
Drill <br>
Saw


==Directions==
==Directions==
#
http://2005roque.smugmug.com/Other/List-Tree/11447314_aYXdS#804897157_4dL5v


==More Information==
==More Information==

Latest revision as of 16:21, 29 March 2011

Materials needed

1 12' 2x4
2 8' 2x4's
1 24" x 3 1/2" piece of 1/4" luan plywood or equivalent
1/2 sheet 3/4" plywood
4 3/4" x 48" hardwood dowels
8 standard door hinges (there are probably better options out there, I used what I had on hand)
2 5/8" x 6" shoulder bolts w/nuts and washers
~10 4" screws
1 3-4' strap. (we used nylon because, again, it was what we had.)

Full height is 15' 6".

Disclaimer: This is a prototype that I completely made up as I went along. If anyone has better ideas for assembly, materials, design.... whatever: PLEASE, feel free to run with it.

Tools needed

Drill
Saw

Directions

http://2005roque.smugmug.com/Other/List-Tree/11447314_aYXdS#804897157_4dL5v

More Information