Creating a shield tree: Difference between revisions
From EastKingdomWiki
(New page: ==Materials needed== * ==Tools needed== * ==Directions== # ==More Information== *Creating a device shield for the Crown Tourney heraldry trees Category:Articles) |
No edit summary |
||
Line 1: | Line 1: | ||
==Materials needed== | ==Materials needed== | ||
1 12' 2x4 | |||
2 8' 2x4's | |||
1 24" x 3 1/2" piece of 1/4" luan plywood or equivalent | |||
1/2 sheet 3/4" plywood | |||
4 3/4" x 48" hardwood dowels | |||
8 standard door hinges (there are probably better options out there, I used what I had on hand) | |||
2 5/8" x 6" shoulder bolts w/nuts and washers | |||
~10 4" screws | |||
1 3-4' strap. (we used nylon because, again, it was what we had.) | |||
Full height is 15' 6". | |||
Disclaimer: This is a prototype that I completely made up as I went along. If anyone has better ideas for assembly, materials, design.... whatever: PLEASE, feel free to run with it. | |||
==Tools needed== | ==Tools needed== | ||
Drill | |||
Saw | |||
==Directions== | ==Directions== | ||
# | http://2005roque.smugmug.com/Other/List-Tree/11447314_aYXdS#804897157_4dL5v | ||
==More Information== | ==More Information== |
Revision as of 16:19, 29 March 2011
Materials needed
1 12' 2x4 2 8' 2x4's 1 24" x 3 1/2" piece of 1/4" luan plywood or equivalent 1/2 sheet 3/4" plywood 4 3/4" x 48" hardwood dowels 8 standard door hinges (there are probably better options out there, I used what I had on hand) 2 5/8" x 6" shoulder bolts w/nuts and washers ~10 4" screws 1 3-4' strap. (we used nylon because, again, it was what we had.)
Full height is 15' 6".
Disclaimer: This is a prototype that I completely made up as I went along. If anyone has better ideas for assembly, materials, design.... whatever: PLEASE, feel free to run with it.
Tools needed
Drill Saw
Directions
http://2005roque.smugmug.com/Other/List-Tree/11447314_aYXdS#804897157_4dL5v