Creating a device shield for the Crown Tourney heraldry trees: Difference between revisions
From EastKingdomWiki
(Edited/Added directions. Should be good to link now!) |
m (Minor text edits) |
||
Line 13: | Line 13: | ||
=Directions= | =Directions= | ||
#Cut the piece of plywood down to a shield shape, no bigger than 11" wide and 15.5" tall.[[Image:ShieldTreeBlank.png]] | #Cut the piece of plywood down to a shield shape, no bigger than 11" wide and 15.5" tall.[[Image:ShieldTreeBlank.png]] | ||
#Drill 2 holes at the top of the shield, 5" from the top, and 1.75" from the edge. | #Drill 2 holes at the top of the shield, 5" from the top, and 1.75" from the edge. Holes must be big enough for the metal binder rings.[[Image:ShieldTreeBlank_Top.png]] | ||
#At this point, the shield can be left it’s natural color, stained or painted | #At this point, the shield can be left it’s natural color, stained or painted. | ||
#After the stain or paint is completely dry (usually a day or two), your device can be painted onto the front, and your name clearly onto the back. | #After the stain or paint is completely dry (usually a day or two), your device can be painted onto the front, and your name clearly onto the back. | ||
#Once the device is dry, apply the clear top coat to both sides and attach the metal binder | #Once the device is dry, apply the clear top coat to both sides and edges, then attach the metal binder rings through the holes. | ||
#In this case, there is a | #In this case, there is a rule #6 - Have fun with it! |
Revision as of 10:04, 10 January 2011
Materials needed
- two 3" metal binder rings
- a piece of 1/4" hardwood plywood, no more than 15.5" x 11"
- wood stain (optional)
- your choice of paint (acrylics recommended)
- clear topcoat spray (optional but recommended)
Tools needed
- jigsaw or coping saw (something you can cut a curve in the plywood with)
- drill with a 1/4" bit
- paintbrush
Directions
- Cut the piece of plywood down to a shield shape, no bigger than 11" wide and 15.5" tall.
- Drill 2 holes at the top of the shield, 5" from the top, and 1.75" from the edge. Holes must be big enough for the metal binder rings.
- At this point, the shield can be left it’s natural color, stained or painted.
- After the stain or paint is completely dry (usually a day or two), your device can be painted onto the front, and your name clearly onto the back.
- Once the device is dry, apply the clear top coat to both sides and edges, then attach the metal binder rings through the holes.
- In this case, there is a rule #6 - Have fun with it!